Purchasing a pre-engineered metal building can be exhaustive. Doing the proper research to get exactly what you need is necessary. Here, we’ve put together a list of our most frequently asked questions to help make the process as pain free as possible.
How long do metal buildings last?
With proper maintenance an engineered metal building will last decades. Metal buildings are built out of steel and will not rot or be prone to pest like wood built structures.
Are metal buildings cheap?
Not exactly. Think of the durability and low maintenance compared to typical wood structures. Affordable, absolutely!
Do we manufacture our buildings?
You bet! All of our building frames are fabricated right here in our Athens, Texas manufacturing facility.
Does Athens Steel Building pull permits?
Even though our buildings are designed and fabricated to meet your local building codes it will be your responsibility to pull permitting should it be required in your area. Prior to ordering your building you’ll want to consult with your local building authorities to make this determination.
Should I insulate my metal building?
Insulation prevents water from condensating on the walls and roof of your building. It also provides a radiant barrier to reduce heat gain during those hot summer days.
I want a building quote, what is my next step?
It’s simple. Building quotes can be obtained by calling our office or by requesting a quote or call back thru our online portal.
What types of metal buildings do we offer?
Athens Steel Building is a red iron steel building manufacturer. Red Iron (aka I-beam) is a type of structural steel coated with an oxide primer to prevent water infiltration ensuring you have a structurally sound building for decades.
What area do we service?
We provide buildings through-out the contiguous United States.
Can I customize my metal building?
100% YES! The best part about a metal building is customizability. All of our buildings are designed and built specific to your building needs.
Are there additional cost for certain colors?
Possibly. We offer a wide selection of colors to chose from however some colors are considered premium and do have a slight cost increase.
What if I’ve ordered my building but need to make changes?
No problem. Changes to your building are possible until it reaches the manufacturing process.
How are metal buildings dimensioned?
It’s important to understand metal building lingo when discussing the width, length and height of your building with your sales representative. When referring to the width, this describes the building when looking at the gabled end or your rigid frame span. The length refers to the opposite direction or where the columns are located. The eave height is measured to the top of the eave strut. It’s important to know if you’ll need any clearances for your building for oversized vehicles, cab tractors or RV’s to include the roof mounted A/C unit.